Description
Straight from the laser cutter. Order one or many and color your own version.
Straight from the laser cutter means the wood is fairly rough and has some darkened areas from the cutting process. It is not ready to paint on. When I make the versions for sale on this site, I typically sand the front surface with 220 grit sandpaper and then apply a pre-stain finish. Pre-stain finishes are used by woodworkers on bare wood before staining or painting to prepare the wood so that it absorbs the finish evenly. If you order these, you will need to do the sanding. I sell sanded versions as well as sanded and stained versions as well.
Materials
Made from high quality 3mm Russian Baltic Birch plywood, each figure has been precision lasercut to the exact outline of Rudolf Steiner’s preparatory sketch.
Size
The figures are more or less exactly the size Steiner drew them, with very minor adjustments. They have been normalized to have a height from head to foot of approximately eight inches (20cm). Most figures are thus around 11 inches (28 cm) in total with the base. There are two figures that have their arms above their heads; these are about 12 inches total (30cm). The dimensions listed below are for the figures packed for shipping.
Figures
In your order notes, please specify which figure or figures you want. For example, if you want a full set, order 35 blanks, and then note that you want one of each. You can order any quantity. Orders of more than 50 blanks may require a few days for production. Very large orders could take longer.
